Amarine Made 0.75L 125 PSI,Pre-Pressurized Accumulator Tank Pressure Storage Vessel Hold Water Under Pressure Water Pump Flow Control Internal Bladder 25oz for Boat,Marine, RV,Caravan

★Parameter Inlet/Outlet Dia:1/2" MNPT Volume:0.75 Liter(25 FL OZ) Water psi:Max 125 PSI (8.6 BAR) Pre-charge pressure:10 PSI(0.87 BAR) Air Fill Vale:standard automotive style tire valve Applications:Boat,Marine, RV,Caravan,ect ★Please Note 1.Relieve air psi prior to disassembly 2.Do not use to pump flammable fluids,gasoline,kerosene fuel oil 3.Do not use pump in a explosive environment or use where flammable vapors are present 4.Petrol or fluids with flash point below 37°C(98°F), explosion or death may occur. 5.The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set accumulator tank to ~3 PSI below your water pump's cut-in pressure and make sure it is connected to the outlet of the pump 6.Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.

• Connect Accumulator Tank to outlet side of water pump for best results
• Accumulator tanks hold a reservoir of air and water down stream from the pump
• Longer pump life, lower battery drain,reducing noise and providing a more consistent water supply.
• Internal rubber membrane eliminates maintenance and simply fitted to new or existing systems
• Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery